The world's first low profile power brick with switching power supply technoloy. Introducing the Low-Profile CS6 following on the tremendous success of of the 1 SPOT Pro CS7 and CS12, Truetone presents the most powerful slim-line power supply in its class, the 1 SPOT Pro CS6. Utilizing the energy efficient technology found in all 1 SPOTs, the CS6 is the first low-profile power brick to be able to put out up to 1600mA of pure, silent power. Just like its bigger brothers in the 1 SPOT Pro line, the CS6 has a variety of DC voltages available to power just about any pedal on the market. Each output is completely isolated, regulated and filtered, eliminating crosstalk and noise. With no big transformer to hinder their performance, proximity noise is not an issue with any 1 SPOT Pro. The low-profile design of the 1 SPOT Pro CS6 allows it to be mounted under flat pedalboards like the Pedaltrain® Nano and Metro series. However, the compact design is also perfect for mounting on top of pedalboards, serving the dual role of a power supply and pedal riser.
MORE»
| Price | $142.99 |
POD® Express Black is an ultra-portable amp and effects processor that gives you a toolbox of sounds for crafting music and modern, high-gain tones. Simple controls make it easy to use, while models derived from the award-winning HX® family of processors ensure exceptional hard-driving sound quality and authentic feel. POD Express Black gives you seven amps, seven cabs, and 17 distortion, modulation, reverb, and delay effects – including a looper – and it may be powered by three AA batteries (included) or an optional 9-volt power supply. Download the free POD Express Edit app for your computer or mobile device to quickly and easily access a world of deeper tone editing, preset management, and global settings. Additional features include stereo outputs, tap tempo, a tuner, a noise gate, a headphone output, and a USB-C audio interface with re-amping capabilities. Add an optional expression pedal for volume control, or up to two footswitches to select presets or turn effects on and off. Wherever you play music – take POD Express Black!
Features:
• Ultra-portable design lets guitarists take it anywhere
• Simple controls make it easy to quickly dial in tones
• HX-quality models for exceptional sound and feel
• Specially curated line-up of classic and modern high gain sounds
• 7 amps, 7 cabs, and 17 effects, including a looper
• Powered by 3 AA batteries or an optional 9-volt power supply
• Stereo Main outputs and stereo headphone output
• Free POD Express Edit app for editing tones and handling presets
• USB-C audio interface for recording, monitoring, re-amping
• Connect an optional expression pedal or 2 external footswitches
MORE»
| Price | $179.99 |
British Invasion is a 5W Class AB guitar amplifier head. It captures the main characteristics of the legendary AC30 at low volume. Tweak the 3-band EQ, Volume and Gain knobs to recreate some authentic British Sound in your living room! Features include:
• Sound inspired by Legendary VOX AC30*
•?Extremely compact configuration for portability
•?High quality tone with Volume and Gain controls
•?3 Band EQ controls for shaping your tone
•?Speaker out can automatically fit cabinets of different impedances (4-16)
•?FX LOOP for using external effects
•?Headphone output jack is very convenient for practicing and recording
•?Aux In jack can let you play with an external music player
•?18V DC power supply (Adapter included)
•?Power Output: 5 Watts
•?Dimensions: 128mm (W) x 75mm (D) x 59.5mm (H)
•?Weight: 440 g
MORE»
| Price | $99.99 |
Players like SRV, Eric Johnson, and John Mayer have been singing the praises of a rare 100-watt 6L6 Dumble Amp, the Steel String Singer, that achieved legendary status in the mid-1980s. And whether you're looking for a taste of Texas sweet tea or a return to Gravity, the Vertex Steel String Clean Drive MkII – now 33% slimmer and with an added trick up its sleeve – faithfully captures that “SSS” magic using an actual Dumble Steel String Singer #001. The Steel String MkII is dead-simple in its operation yet matchless in its rootsy mojo. With gain settings below 1:00, the Steel String Clean Drive MkII makes an incredibly versatile clean boost, with a Filter control to dial in how much of that D-style midrange shaping your instrument demands. Above 1:00, the Steel String Clean Drive MkII begins to sweeten your signal with vine-ripened drive characteristics matured in the California sun. Wide open, this pedal virtually breathes fire, with enough juicy gain to take you from Flavor Town well into Brown County.
Features include:
• Dumble SSS tone from a compact stompbox
• Based on model #001 of an original Dumble SSS amp
• 33% slimmer and lighter than the original Steel String
• New Jazz/Rock toggle thickens up cleans and tightens up drive tones
• Optional 9 to 18VDC operation (adapter not included)
• True Bypass
• Designed & Assembled in California
MORE»
| Price | $199.99 |
Purple Wind is a 5W Class AB Guitar Amplifier Head. It captures the main tonal characteristics of the legendary Plexi Super Lead. With 3-band EQ and Gain/Volume control you're set for classic rock on the stage or at home. Features include:
• Sound inspired by the legendary Marshall Plexi SuperLead 1959 (Limited Edition)*
•?Extremely compact configuration for portability
•?High quality tone with Volume and Gain controls
•?3 Band EQ controls for shaping your tone
•?Speaker out can automatically fit cabinets of different impedances (4-16)
•?FX LOOP for using external effects
•?Headphone output jack is very convenient for practicing and recording
•?Aux In jack can let you play with an external music player
•?18V DC power supply (Adapter included)
•?Power Output: 5 Watts
• Dimensions: 128mm (W) x 75mm (D) x 59.5mm (H)
•?Weight: 440g
MORE»
| Price | $99.99 |
The world's first power brick with switching power supply technology. 1 SPOT Technology... what does that mean and why should I care? Technically, it's swithing power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick... old tech that hasn't changed in decades and has a lot of limitations. We took the same triple filtered switching power supply technology found in our famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, we were able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world.
A major benefit of using a switching power supply is that it can handle for more current (power being pulled out of it) than any transformer-based power supply. Although we had to put power rating labels on each output to satisfy certification agencies (yes, we actually certified these, unlike many companies), the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output without causing any problems. With a transformer-based power supply, you can't get away with that. The important thing is to not exceed the total of all the labels. With a CS7 (for example), the output labels add up to 1900mA total. That means the totaly current draw of all your pedals should be less than 1900mA.
MORE»
| Price | $131.99 |
Patch Kommander is a light-weight, programmable loop switcher that keeps your pedals and effects in order. Four true-bypass loops guarantee a pristine signal, a built-in input buffer saves your highs and harmonics, and an ultra-intuitive control panel sets you free from complex, annoying patch programming.
Features include:
• Compact size, rock solid aluminum casing
• 4 independent relay-based True Bypass audio loops
• Switchable high quality input buffer for preventing high frequency loss
• Mute/Tuner function with independent tuner output
• SW A/B function for amp channel switching
• 2 switching modes (Direct mode for instant access; Preset mode with 12 programmable presets for different combinations)
• Low switching noise
• 9VDC power supply
MORE»
| Price | $124.99 |
Mojo Diamond is a 5w Class AB guitar amplifier head inspired by legendary Fender Tweed. Like the original Tweeds, Mojo Diamond has a tiny body and loud, sweet sound. With the 3-band EQ, Volume and Gain control, you can easily create some shining sound that makes you stand out from others everywhere! Features include:
• Sound inspired by Legendary Fender Tweed
•?Extremely compact configuration for portability
•?High quality tone with Volume and Gain controls
•?3 Band EQ controls for shaping your tone
•?Speaker out can automatically fit cabinets of different impedances (4-16)
•?FX LOOP for using external effects
•?Headphone output jack is very convenient for practicing and recording
•?Aux In jack can let you play with an external music player
•?18V DC power supply (Adapter included)
•?Power Output: 5 Watts
•?Dimensions: 128mm (W) x 75mm (D) x 59.5mm (H)
•?Weight: 440 g
MORE»
| Price | $99.99 |
This Hotone power cable is ideal for a high density pedal board and gives it a clean and neat look.
Features:
• 3.5mm wire diameter
• 24 AWG oxygen-free copper inner core
• Over 25cm between plugs
MORE»
| Price | $7.99 |
The Danelectro Honeytone N-10 guitar mini amp cranks like a little hot rod has a great clean or overdriven sound. The Honeytone amp also boasts a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. The Honeytone N-10 amp is powered by 9-volt battery (included) or a Danelectro DA-1 adapter.
Features include:
• Great clean and overdrive tones (Best with Polaroid 9V Batteries)
• Leather handle
• Belt clip
• Headphone jack
• Color: Aqua
MORE»
| List | $39.95 |
| Price | $35.96 (Save: $3.99) |
The Danelectro Honeytone N-10 guitar mini amp cranks like a little hot rod has a great clean or overdriven sound. The Honeytone amp also boasts a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. The Honeytone N-10 amp is powered by 9-volt battery (included) or a Danelectro DA-1 adapter.
Features include:
• Great clean and overdrive tones (Best with Polaroid 9V Batteries)
• Leather handle
• Belt clip
• Headphone jack
• Color: Burgundy
MORE»
| List | $39.95 |
| Price | $35.96 (Save: $3.99) |
Nobody does Reverse Delay like this! Invented by ?Danelectro® in 1999, this pedal has achieved cult status. Originals cost a small fortune. Why? Because of its warm violin-like, organ-like tone. It literally flips the phrase you just played and plays it ?backwards. There's nothing like it – party like it's 1999...because it is!
MORE»
| Price | $199.00 |
The Bit Buffer is a tiny (2″ x 1.5″) buffer that uses an ultra-low distortion, low-noise Burr-Brown op amp. Place it at the beginning of your pedal chain to prevent high-frequency loss (tone suck), or right before a long cable to a pedalboard or amp. Works with standard pedal power supplies from 9-18 V.
MORE»
| Price | $79.00 |
Limited edition version in red!
With its simple plug-and-play interface, ultra-portable lightweight design, and best-in-class tones, the POD® Go guitar processor gets you on the road to ultimate tone. POD Go enables a simple and intuitive workflow. Choose, edit, and control sounds using the large color LCD screen, five push encoders, eight rugged footswitches, and cast-aluminum multi-function expression pedal – and add two external footswitches or a second expression pedal for even more real-time control. All the essential audio connections are at your fingertips, too, including balanced stereo outputs, a duplicate amp out that can be tapped before the Cab/IR, a stereo effects loop, a headphone jack, and even a USB port for accessing the 4-in/4-out audio interface with re-amping.
POD Go boasts an arsenal of professional-quality amp, cab, and effect models drawn from the acclaimed HX family of effects processors – including classic amps like the Blackface, Plexi Lead, and Treadplate – as well as supporting third-party IR loading. What is more, sophisticated features such as Snapshots enable you to easily access all the tones you'll need to cover every section of every song. With POD Go, you won't just take the stage – you'll own it!
• Best-in-class performance
• Simple interface with large color display
• Compact, ultra-portable lightweight design
• 270+ HX and legacy amp and effects models
• Third-party IR loading
• Stereo effects loop and Expression Pedal/Footswitch input
• Free POD Go Edit app
MORE»
| List | $669.99 |
| Price | $602.99 (Save: $67.00) |
The original Hotone Nano Legacy Series Amplifier Heads have grown to such demand that it onlymade sense to combine two of them into a single convenient floor-based stompbox design withincreased power, and let it form the core of your live or studio guitar setup...
The Nano Legacy Floor Series features two portable dual-channel floor amplifier models: BritWind and Mojo Attack. The BritWind houses the sound characteristics of Hotone's British Invasion (inspired by the legendary Vox® AC30*) and Purple Wind (inspired by legendary Marshall® PlexiSuper Lead 1959*) Nano Legacy Series amp heads on separate channels. In the same fashion, the Mojo Attack joins those of the Mojo Diamond (inspired by legendary Fender Tweed®*) and Heart Attack (inspired by legendary Mesa/Boogie® Rectifier®*) amps.
Beyond combining two Nano Legacy Series amps in one, the Nano Legacy Floor Series amps feature increased power (75 watts each), as well as enhanced sound quality and dynamic range. In addition, these amps offer extended onboard functions and effects, including independent volume/gain/3-band EQ, a clean boost (up to +12dB), reverb, an FX Loop, a single speaker output for use with 4-16omega cabinets, and a switchable cabinet simulator on its Line and XLR outputs.
Fusing legendary guitar tone with convenience and portability, the Hotone Nano Legacy Floor Seriesamplifiers ensure you're always ready to perform or record. Simply connect one to a cabinet, mixer orinterface, and you're ready to rock!
Features:
• Portable dual-channel floor amplifier
• 75 watts
• Nano Legacy Series preamp tone with enhanced sound quality and dynamic range
• BritWind: Dual-channel design combines two Nano Legacy Series amplifiers in one:
-CH A: Hotone British Invasion, inspired by legendary Vox® AC30*
-CH B: Hotone Purple Wind, inspired by legendary Marshall® Plexi Super Lead 1959*
• Mojo Attack: Dual-channel design combines two Nano Legacy Series amplifiers in one:
-CH A: Hotone Mojo Diamond, inspired by legendary Fender Tweed®*
-CH B: Hotone Heart Attack, inspired by legendary Mesa/Boogie® Rectifier®*
• High-quality tone with independent volume, gain and 3-band EQ
• Built-in boost provides up to +12dB of clean volume boost
• Onboard reverb with clear, natural decay
• FX Loop for integrating external effects
• Single speaker output for use with 4-16omega cabinets
• Line and XLR outputs with switchable cabinet simulator
• Powered by 18-20V DC (center positive) adapter included
* VOX AC30 is an amplifier model of Korg Inc.
* Marshall® Plexi Super Lead 1959 is an amplifier model of Marshall Amplification plc.
* Fender Tweed® is an amplifier model of Fender Musical Instruments Corporation.
* Mesa Boogie® Rectifier® is an amplifier model of Mesa/Boogie Ltd.
MORE»
| Price | $249.99 |
The 1 SPOT Pro CS11 is the same size as the CS12, but with all new outputs and options. It doesn't replace the CS12, but gives users more power and more available 9Vdc outputs. It also has “one more” output on the back, which allows users to connect the CS11 to Truetone's new expansion boxes like the XP5 and the XP8. It goes to 11... and so much more.
MORE»
| Price | $219.99 |
5.5. x 2.1mm plugs. For use with 1 SPOT power supplies or with most other brands.
MORE»
| List | $4.99 |
| Price | $4.49 (Save: $0.50) |
Grown out of next-generation XTOMP technology, the Hotone Binary Series lets loose versatile pro-level effects in compact cases. Based on the same modeling/original effect library that amazed XTOMP users worldwide, Binary Series are dedicated to gather a bunch of high quality effects in a box with more affordable, competitive price. They feature compact casing, dual-footswitch design, versatile inputs/outputs and bright, clear OLED display, which blur the line between “classic pedals” and multi-effects.
At the core of all Binary Series pedals, a powerful dual-DSP platform and CDCM (Comprehensive Dynamic Circuit Modeling) modeling system ensure a realistic playing experience. The CDCM system is built on an extremely complex dynamic variation matrix, able to realistically express every detailed change that occurs during the operational process of actual circuitry: Everything is ALIVE and performs like its original.
The Hotone IR Cab is an impulse response-based cabinet simulator effects pedal that delivers 100 authentic legendary (vintage and modern) guitar and bass cab models. In addition, the IR Cab features CDCM-based legendary studio microphone and power amp models, as well as a variety of detailed mic position (X, Y, Z) and room simulations.
MORE»
| Price | $149.99 |
The Hotone Omni IR is a compact, Impulse Response-based cabinet simulator pedal that delivers realistic emulation of classic guitar and bass miked speaker cabinets. The Omni IR includes 40 high-quality legendary guitar and bass cabinet impulse responses, along with a detailed 4-band semi-parametric EQ. An internal voltage boost circuit provides tons of headroom ensuring the input signal will stay clean, regardless of the instrument's output level. A high-contrast OLED screen makes editing and recalling setting easy in high and low light environments. Omni IR has 40 editable presets which can be adjusted on the pedal or managed via free Mac/PC software. The footswitch can be assigned to bypass the effect or mute the signal. A 1/4″ thru jack provides an unprocessed dry signal to other devices or amplifiers. The pedal includes a 1/4″ output, a balanced XLR out to connect to mixers or audio interfaces, an 1/8″ headphone monitor and an 1/8″ stereo aux input making the Omni IR perfect for both live and recording setups.
Features include:
•Compact, easy-to-use IR cabinet simulator pedal
• Advanced DSP-powered platform ensures high sound quality
• 24-bit AD/DA conversion
• Internal voltage boost circuit for exceptional headroom
• 40 high-quality legendary guitar and bass cabinet impulse responses
• Support for third-party IR files
• Detailed 4-band semi-parametric EQ with 12dB maximum boost and cut
• Micro USB jack for updating firmware and loading/managing impulse responses via free Mac/PC software
• 1/4″ input and thruput
• XLR and 1/4″ outputs
• Ground/Life switch
• 1/8″ stereo Aux In for line level devices (unaffected by Omni IR)
• 1/8″ headphone output for practicing and jamming
• 40 presets
• High-contrast OLED screen
• Assignable footswitch with LED
• 9V DC (center positive) power supply and USB micro cable included
MORE»
| Price | $149.99 |
The Hotone Jogg is a USB audio interface in a mini-pedal form factor enabling you to connect your analog and digital audio. Featuring high-quality, 24-bit AD/DA convertors, the Jogg allows you to incorporate your favorite software and plug-ins into your live performance rig. Built into a rugged housing, the Jogg has a 1/4″ Hi-Z input for connecting guitars and other instruments plus an 1/8″ stereo input for connecting line level devices. Two 1/4″ outputs allow the pedal to be run in stereo and a mono balanced XLR output can send the signal to the front-of-house. An 1/8″ stereo headphone output is included for zero-latency monitoring. Connect the Jogg to a laptop or mobile device and you're ready to play and record great sounding tracks.
Jogg comes with full versions of the Hotone VStomp Amp virtual amp software (PC/Mac/iOS), delivering organic, studio-grade audio and the exact sound character of legendary amplifiers.
Features include:
• Professional USB audio interface in a mini-pedal
• Advanced DSP platform delivers great sound quality and dynamic response
• 24-bit AD/DA conversion, 44.1kHz/48kHz sample rate
• Compatible with PC, Mac, iOS (using an Apple Lightning to USB Camera adapter), and Android (using a Host OTG adapter)
• Plug-and-play – No drivers needed
• GAIN knob provides up to 12dB of clean gain
• OUTPUT level control knob
• 1/4″ Hi-Z instrument input
• 2 x 1/4″ outputs (L & R)
• XLR balanced output (mirrors the Left 1/4″ output)
• 1/8″ stereo Aux input for connecting line level devices
• 1/8″ stereo headphone output for zero latency monitoring
• Includes VStomp Amp virtual amp software (Mac/PC/iOS)
• 9V DC (center positive) power supply sold separately
MORE»
| Price | $99.99 |
If you use vintage battery-powered pedals, you're familiar with two things: their responsiveness and how quickly the batteries run out. That said, players don't like taking their boards apart to change batteries all the time. With the Vertex Effects Battery Power Supply, it's possible to use your batteries without all of the related hassle. Load the power supply with four 9V batteries, connect to the power inlet, and get rocking! This power supply is intended for use with vintage overdrives, distortions, fuzzes, and wah pedals. But that doesn't mean you can't use select modern pedals. With this power supply on your board, you won't have to tear your pedalboard apart each time a battery dies. Instead, you can spend more time doing what you love – playing through your effects. Read on to see if the Vertex Effects Battery Power Supply is right for you.
Features include:
• Individually isolated outlets cut down on noise
• Top-mounted thumbscrew makes battery changes fast
• Ideal for old-school fuzz, overdrive, distortion, and wah pedals
• Active input voltage sensing to saves battery life
• Four Isolated Outputs: 5.5 x 2.1mm center negative
• Cables not included
• Batteries not included
MORE»
| Price | $99.99 |
• Second generation amp modeler & effects processor with a pedalboard-friendly case
• Perfectly fits and pedalboard matrix when used as an effect pedal
• 4-inch 800x480 dynamic touchscreen and newly-designed UI for more intuitive control
• 8-in, 8-out USE audio interface
MORE»
| Price | $499.99 |
The 1 SPOT Pro XP8-PS is just like the XP5-PS, except it has 8 outputs instead of 5. Each output provides 9Vdc of studio-clean power and can handle at least 500mA of current draw per output. Measuring 133x88x30mm (5.24x3.46x1.18″) and weighing only 459 grams (16.19oz or about 1lb), it can be easily attached to a pedalboard using only Vel-Cro. Because of its low profile, the XP8 can be mounted in under most pedalboards, or be used as a pedal riser on top of a board. With 2 linked input jacks, you can power a second XP8 or XP5 by simply connecting a DC cable.
MORE»
| Price | $149.99 |
HX Effects features 100+ effects taken from the award-winning Helix hardware and software processors, all in a compact, pedalboard-friendly format, and up to nine effects can be run simultaneously. In addition, legacy effects from the acclaimed Line 6 M-Series and Stompbox Modeler pedals are also included. Effortlessly edit effects using the eight capacitive-sensing footswitches, six scribble strip LCDs, and color-coded LED rings. Simply touch a footswitch with your finger to instantly jump to any effect, quickly adjust a parameter, or assign controllers. HXEffects also offers a choice of true analog bypass or DSP bypass with trails, and an industry-leading 123dB of dynamic range delivers tremendous depth and ultra-low noise. Extensive routing and control options provide flexibility in the studio or on stage, and facilitate easy integration with traditional pedalboards and amps.
Features include:
• 100+ HX effects for your pedalboard – run up to 9 simultaneously
• Additional legacy effects library from M13, M9, M5, DL4, MM4, FM4, DM4 and Verbzilla
• Capacitive-sensing switches with LED rings and scribble strips
• Can act as the command center for your entire amp and pedal rig
MORE»
| Price | $649.99 |
The 1 SPOT mA Meter (that's “milliamp meter” for all you non-engineers), is a simple device for measuring the power consumption of your guitar pedals.
You're probably used to seeing power supply outputs with ratings like “100mA,” which is the maximum that output can provide for a pedal. And you might have wondered whether it was enough to power your particular pedal(s). The mA Meter answers that question for you by showing exactly how much current your DC powered pedal really needs.
No more scouring the Web for information about your pedals that might not even be accurate. Just plug your pedal into the mA Meter and see for yourself how much power it needs! And as an added bonus, we've even thrown in a cable tester as part of the mA Meter... perfect for those last second cable checks at the gig.
MORE»
| List | $32.99 |
| Price | $29.69 (Save: $3.30) |
Ampero Press is a compact, passive volume/expression 2 in 1 pedal designed not only for controlling Ampero series multi-effects, but also for controlling other musical devices (with external EXP pedal jacks) or using as a passive volume pedal. Ampero Press boasts the DNA of the Hotone Ampero line: classic black and gold attire with a high-end textured finish. It has solid aluminum alloy casing, smooth and comfortable user experience.
MORE»
| Price | $79.99 |
Ampero Mini is the smallest guy in our Ampero family so far, offering you uncompromised Ampero sound in an ultra compact aluminum case. It has the essentials of stunning Ampero effects armory with 3rd party IR support. Onboard essential I/O jacks are more than enough for daily use, the touch screen and intuitive UI ensures smooth, straight-forward experience on a minimalized chassis. Ampero Mini will offer you excellent performance on the money, especially for players who want to experience Ampero tone, rookies on a budget, session musicians who need ultra-compact size and pro tone, even experienced amp modeler players.
MORE»
| Price | $229.99 |
The XP5-PS is a package containing the 1 SPOT Pro XP5, along with a 12Vdc 2.5A adapter which allows you to power the XP5 without having a CS11. The adapter comes with an array of international plugs, so you can take it with your pedalboard anywhere in the world. Some musicians may even choose to get one of these, plus another XP5, to distribute their power around the pedalboard and have the dual XP5's acting as two pedal risers.
MORE»
| Price | $119.99 |
The 1 SPOT Pro XP5 is a tiny little powerhouse which allows you to add 5 more isolated outputs to your CS11. Each output provides 9Vdc of studio-clean power and can handle at least 500mA of current draw pet output. Measuring 88x88x30mm (3.46x3.46x1.18″) and weighing only 333 grams (11.75oz), it can be easily attached to a pedalboard using only Vel-Cro. Because of its low profile, the XP5 can be mounted under most pedalboards or be used as a pedal riser on top of a board. With 2 linked input jacks, you can power a second XP5 or XP8 by simply connecting a DC cable.
MORE»
| Price | $99.99 |
5.5 x 2.1mm plug & socket. For use with 1 SPOT power supplies or with most other brands.
MORE»
| List | $4.99 |
| Price | $4.49 (Save: $0.50) |
