Radius goes far beyond traditional ring modulation. With precise control over the balance and frequency ratios of both sidebands, you'll have more advanced control than with any ring mod that has come before. Organic, complex harmonic structures, bell-like tones, metallic textures, frequency shifting, soft tremolo, and bubbly phaser sounds are all on tap.
Pitch tracking, a push-to-tune footswitch, and picking dynamics make it responsive and predictable in concert. In the studio, Radius has well-spaced controls for tabletop use and a full MIDI implementation for DAW integration. The 24-bit 96 kHz codec, audiophile op amps and stereo input/output make it equally at home in the studio or control room. Radius is a musical ring modulator and frequency shifter that lets you modfy the timbre of your instrument in new ways.
With a multi-waveform LFO, step modulator, and MIDI-playable carrier oscillator, Radius modernizes classic electronic techniques for the future.
Features:
• Stereo ring modulator and frequency shifter
• Continuous mix between ring modulation and frequency shifting
• Selectable 2X frequency ratios for upper and lower sidebands
• Frequency shifting with feedback
• Three carrier frequency ranges (low, high, quantized)
• Carrier frequency pitch tracking (monophonic, +/- 100%)
• Pust-to-tone carrier oscillator
• MIDI-playable carrier oscillator
• Multi-waveform LFO (triangle, square, random, intelligent random, X mod +/-)
• Step modulator (1-8 steps), programmable via front panel
• Tap tempo and MIDI clock sync
• Envelope follower
• Envelope-triggered LFO (one-shot ramp, pulse, random, step mod)
• Configurable AUX switch (tap, tune, preset, LFO)
• USB and TRS MIDI
• Full MIDI implementation
• 96 kHz sampling rate
• Web editor with preset upload/download
• User-installable firmware updates (USB)
Designed and assembled in USA. Requires a 9V DC 250 mA power supply (not included).
MORE»
| Price | $349.00 |
The Bit Mixer is a small, high-quality mixer designed for pedalboards. It features ultra-low distortion, low noise op amps. High-impedance inputs are designed for guitar, but work with line level signals as well. Each input has a volume knob that goes from off to unity gain. Only 4.4″ x 2.6″, and works with standard pedal power supplies from 9-18 V.
Uses:
• Connect multiple instruments to one amp
• Combine parallel effects chains
• Clean blend or analog dry path
MORE»
| Price | $149.00 |
Remote with 4 footswitches to access presets and extended pedal functions. Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol. Connects to the pedal via a 1/4″ TRS cable (included), and does not require power. Works with all Red Panda effects pedals that have USB. See your pedal's documentation for specific functions.
MORE»
| Price | $99.00 |
The Bit Buffer is a tiny (2″ x 1.5″) buffer that uses an ultra-low distortion, low-noise Burr-Brown op amp. Place it at the beginning of your pedal chain to prevent high-frequency loss (tone suck), or right before a long cable to a pedalboard or amp. Works with standard pedal power supplies from 9-18 V.
MORE»
| Price | $79.00 |
