The PRSM Shock Mount is a flexible support system that helps suppress low-frequency rumble on the microphone line by absorbing and damping vibrations picked up from the studio desk or console. The PRSM is designed for use with the large-diameter professional-grade Heil Sound microphones, including the PR 30 and PR 40. Its 5/8″ threads mount onto the PL-2T “Topless” and other mounts, for easy installation. The shock mount weighs 16.2 oz.
MORE»
| Price | $99.00 |
The Heil PR40 microphone boasts the widest frequency range of any dynamic mic in the Heil PR series. The PR40 incorporates Heil's sage-like understanding of phasing plug placement, along with the use of a very large (1″), low mass diaphragm, and custom magnet metals housed in a specially designed microphone body.
The PR40 diaphragm is shock mounted such that it is completely de-coupled from the anodized Champagne matte-finished steel body. In addition to dual mesh screens, each made with different diameter screen apertures, there is an internal breath blast filter on the diaphragm element itself, providing superb response for the human voice across the entire vocal range, without “popping” noises. In fact, the PR40 will provide a flawless, smooth, flat response from 28Hz all the way up to the 18kHz, making this a great microphone for everything from vocals, to bass drums and tom drums, to guitar and bass cabinet micing and more.
In short, the PR40 is known by professionals as the “thoroughbred workhorse” of professional sound recording and reinforcement. The PR40 is available in black, black with a gold grill, champagne, gold plate, or chrome plate. It ships with a mic clip and a leatherette carry bag. A windscreen is available to purchase separately.
MORE»
| Price | $349.00 |
The Pro Set 3 headphones will work for all types of music recording, as well as be great for internet and commercial broadcasting, in addition to amateur radio. With the Pro Set 3 headphones you get three detachable cables. A 1.8 M flexible straight cable; and a 1.8 M straight cord with mating iPhone/iPod compatible 3.5mm plug; and also, a 3 M coil cord – all twist lock terminating in a 1/8″ (3.5 mm) professional gold plated screw-on 1/4″ (6.3mm) adapter. From 10Hz all the way to 22kHz, the Heil Pro Set 3 headphones have got you covered.
MORE»
| Price | $129.00 |
The PR35 is built with the specifications of the PR30 (large 1.5″ shock-mounted hum-bucking), voice-coil to ward off unwanted handling noise & electronic interference, and provides great rejection of off-axis/180-degree noise as well. However, the PR35 is equally at home in your hand, as it is micing a guitar cabinet, or cradled in a broadcaster's boom. The PR35 has excellent articulation & a natural upper mid-range along with a smooth flat response throughout. You will be hard-pressed to experience overload or feedback with a PR35. The PR35 adds a low-cut roll-off switch, allowing you to prevent low-end feedback loops from ever getting started. The PR35 will provide high-end studio results live, in the studio, or wherever. In addition to vocals, the PR35 is great for a variety of instruments including guitar cabinets, drums, and more. With the PR35 you get three interchangeable colored trim rings (black, silver, and purple), and a mic clip along with a black acoustical windscreen, in a padded leatherette carrying case.
MORE»
| Price | $269.00 |
The PR37 is designed for live sound reinforcement and recording applications with the vocalist in mind. As the next step in the evolution of Heil Sound's family of vocal microphones including the PR35 and PR22, the PR37 delivers an ultra-clear and transparent sound that brilliantly cuts through any mix. The PR37's frequency response features smooth, low mids, and an enhanced upper mids presence that allows vocals of all kinds to effortlessly shine through. The PR37 provides -40 dB of rear noise rejection, making it perfect for live applications, particularly in situations with high stage volume. The large-diameter (1.5″) dynamic element of the PR37 is housed in a stable mounting system that is designed to reduce handling noise. The rugged metal body of the PR37 is designed to provide durable protection for the microphone, making it the quintessential workhorse microphone for live use, while still providing superior sound quality that is characteristic of Heil microphones. Supplied with SM-5 mic clip, windscreen, and Heil Sound padded zipper bag.
MORE»
| Price | $269.00 |
The Heil PR40 microphone boasts the widest frequency range of any dynamic mic in the Heil PR series. The PR40 incorporates Heil's sage-like understanding of phasing plug placement, along with the use of a very large (1″), low mass diaphragm, and custom magnet metals housed in a specially designed microphone body.
The PR40 diaphragm is shock mounted such that it is completely de-coupled from the anodized Champagne matte-finished steel body. In addition to dual mesh screens, each made with different diameter screen apertures, there is an internal breath blast filter on the diaphragm element itself, providing superb response for the human voice across the entire vocal range, without “popping” noises. In fact, the PR40 will provide a flawless, smooth, flat response from 28Hz all the way up to the 18kHz, making this a great microphone for everything from vocals, to bass drums and tom drums, to guitar and bass cabinet micing and more.
In short, the PR40 is known by professionals as the “thoroughbred workhorse” of professional sound recording and reinforcement. The PR40 is available in black, black with a gold grill, champagne, gold plate, or chrome plate. It ships with a mic clip and a leatherette carry bag. A windscreen is available to purchase separately.
MORE»
| Price | $349.00 |
The Heil WSMPR40 is designed to snuggly fit the Heil PR30 and PR40 large-diaphragm microphones.
MORE»
| Price | $19.00 |
The Heil PR22-UT microphone is essentially the PR22, but (like all Heil Utility microphones), saves you money by shipping with just the essentials. The same patent pending diaphragm shock mounting, along with tight cardioid pattern element of the PR22, makes the PR22-UT the choice for those who expect the best in a dynamic cardioid microphone.
The PR22-UT has exceptionally low noise handling, response and impeccable reproduction of whatever source it takes in. The PR22-UT is a sleek & elegant, yet rugged, microphone – just like the PR22. With the PR22-UT you get a stainless mesh screen, mic stand clip, and black foam acoustical windscreen, in a zipper case. It is also available in a switched version.
MORE»
| Price | $119.00 |
The Heil PR40 microphone boasts the widest frequency range of any dynamic mic in the Heil PR series. The PR40 incorporates Heil's sage-like understanding of phasing plug placement, along with the use of a very large (1″), low mass diaphragm, and custom magnet metals housed in a specially designed microphone body.
The PR40 diaphragm is shock mounted such that it is completely de-coupled from the anodized Champagne matte-finished steel body. In addition to dual mesh screens, each made with different diameter screen apertures, there is an internal breath blast filter on the diaphragm element itself, providing superb response for the human voice across the entire vocal range, without “popping” noises. In fact, the PR40 will provide a flawless, smooth, flat response from 28Hz all the way up to the 18kHz, making this a great microphone for everything from vocals, to bass drums and tom drums, to guitar and bass cabinet micing and more.
In short, the PR40 is known by professionals as the “thoroughbred workhorse” of professional sound recording and reinforcement. The PR40 is available in black, black with a gold grill, champagne, gold plate, or chrome plate. It ships with a mic clip and a leatherette carry bag. A windscreen is available to purchase separately.
MORE»
| Price | $349.00 |
The Heil Sound PL2T Topless® Boom mount is a unique and versatile boom that utilizes a system of perfectly balanced internal springs to provide perfect balance and silent, effortless adjustment of its position. The PL2T easily handles microphones weighing up to 2.5 lbs., and it makes for a professional-looking installation without adding to the clutter in front of you.
The Heil PL2T features a hollow channel that the microphone cable can be fed through and provides the perfect cable maintenance. The unique Topless® design of the PL2T allows you to remove the top and back cover plates, so you can thread the microphone cable along the spine of the mount. Once the cable is in place, you snap the cover plates back in place, for a clean installation with no visible wiring. The PL 2T is shipped with a brass lined “C” clamp mount that accept up to a 1-1/2″ thick table.
The PL2T will fit all of the brass lined Heil mounting accessories:
• DT-1 Flush Mount
• FL-2 Flange Mount
• WM-1 Wall Mount
• RS-1 Riser Mount
MORE»
| List | $115.00 |
| Price | $103.50 (Save: $11.50) |
The Heil 31 BW microphone is the answer to those who use the PR30 for cymbals & toms, but need it to fit in tight spots. Through a collaboration with FOH engineer for the Charlie Daniels Band, Bob Workman (hence the “BW” designation), the 4-inch tall PR31BW was developed.
The PR31BW realizes all the benefits of the PR30 in a smaller footprint suitable for mounting to toms and for capturing cymbals from underneath, as well as from overhead. As with the PR30, there's no worrying about picking up nearby sounds from other drums, or other sources. And also like the PR30, there's no worrying about overload.
The PR31BW is great for vocals, guitar cabinets, brass horns, saxophone, and piano and it will even fit inside Leslie speaker cabinets, and more. There are a variety of mounting options from Heil for drums, guitar and vocals/broadcasting.
MORE»
| Price | $269.00 |
The Heil PR20-UT microphone with its tapered, black mic body, sports a tough stainless screen. Think of it as a PR20 minus the additional (black and gold) screens. The PR20-UT utility microphone has the same ruggedness, same quality and frequency range and workmanship as the PR20. The PR20-UT is the microphone to buy in multiple quantities for those seeking to save money while building a high quality “microphone arsenal” to set the stage, or studio. The PR20-UT is without a doubt the new industry standard in utility cardioid dynamic microphones. With the PR20-UT you get the PR20 with a stainless mesh screen, mic clip, black foam acoustical wind screen, in a vinyl zipper carrying bag.
MORE»
| Price | $99.00 |
Not only is the Fin a professional microphone with all the qualities you could ask for in a dynamic cardioid microphone, it also just happens to be one of the coolest-looking mics you've ever seen – combining a “vintage” look with a futuristic and timeless feel, all in one shiny microphone.
Best-in-class, smooth, flat response from the shock mounted, large, low mass diaphragm element driven by a powerful magnet, will reward you with rich sound throughout its broad frequency range. The Fin is great in the studio, or live, and it particularly exhibits excellent upper mids.
The Fin has a beautifully sculpted body that is double-chromed in a three-stage plating process. Horizontal fins accent its soft angular profile. As an added bonus, The Fin glows via the four L.E.D. lights inside, which can be turned on and off from via the phantom power from the mixing board. This can make for a dramatic effect, or create that certain “vibe” to enhance your next performance.
The Fin is stocked in chrome and matte black bodies. Each version has either red, white or blue foam color/LEDs.
MORE»
| Price | $229.00 |
The Heil PR30B represents completely original dynamic microphone technology designed for a wide range of professional applications such as sophisticated recording, live sound, and commercial broadcast. Its smooth, wide frequency range sounds like a ribbon but can withstand large amounts of SPL. Outperforming the tired, 30-year-old technology of the industry, the large diameter of the Heil PR30B's dynamic element produces an outstanding upper mid-range that makes the PR30B an ideal guitar microphone as well as an excellent choice for reproducing the human voice.
The pattern control of the Heil PR30B dynamic microphone is outstanding. This exceptional performance is achieved by using the ideal combination of materials for the large low-mass diaphragm and a special mixture of neodymium, iron, and boron that gives the Heil PR30B mic the strongest magnet structure available. These features allow the microphone to achieve magnificent dynamic range. A unique screen system using two different diameter mesh screens and an internal breath blast filter allow the user to talk closely to the microphone with little worry of pops or excessive sibilance. The Heil PR30B's large diameter dynamic element is mounted in a unique sorbothane shock mount atop a non-resonant fixture, decoupling the element from the massive steel body. This body and the internal humbucking coil removes any worry of using the PR 30B near monitor screens or noisy lighting fixtures and controls. The new technology of the Heil PR30B has redefined the dynamic mic with superior wide frequency response, low presence of noise, flawless design, and elite quality expected by an innovator and leader in the field.
MORE»
| Price | $269.00 |
The Heil PR30 microphone steps up the professional audio game by adding a humbucking coil in addition to the shock-mounted large 1.5″ low mass diaphragm to virtually run noise-free in almost any situation. When working in close proximity to PC monitors in the studio, or near neon lights, or other electrical sources on stage, the PR30 is the microphone to use for quiet, flawless operation on drums, guitar cabinets, and vocals.
The PR30 is often compared to high priced ribbon microphones for its wide frequency response and immaculate sound quality. The difference is the PR30 is able to withstand sound pressure levels that would decimate ribbon microphones.
The PR 30 is perfect as a guitar and amplifier cabinet microphone, as well as for drums, but it is also right at home as a vocal microphone, thanks to its internal passive filtering and uniquely designed screen, which virtually eliminates popping and sibilance during up-close vocals. The versatility and quality built into the PR30 make it the choice of some of the top professional musicians, producers, and broadcasters in today's world. The PR30 ships with a mic clip and a leatherette carry bag.
MORE»
| List | $269.00 |
| Price | $242.10 (Save: $26.90) |
The Heil PR40 microphone boasts the widest frequency range of any dynamic mic in the Heil PR series. The PR40 incorporates Heil's sage-like understanding of phasing plug placement, along with the use of a very large (1″), low mass diaphragm, and custom magnet metals housed in a specially designed microphone body.
The PR40 diaphragm is shock mounted such that it is completely de-coupled from the anodized Champagne matte-finished steel body. In addition to dual mesh screens, each made with different diameter screen apertures, there is an internal breath blast filter on the diaphragm element itself, providing superb response for the human voice across the entire vocal range, without “popping” noises. In fact, the PR40 will provide a flawless, smooth, flat response from 28Hz all the way up to the 18kHz, making this a great microphone for everything from vocals, to bass drums and tom drums, to guitar and bass cabinet micing and more.
In short, the PR40 is known by professionals as the “thoroughbred workhorse” of professional sound recording and reinforcement. The PR40 is available in black, black with a gold grill, champagne, gold plate, or chrome plate. It ships with a mic clip and a leatherette carry bag. A windscreen is available to purchase separately.
MORE»
| Price | $399.00 |
The RS-1 is a 12-inch riser that allows you to mount the Heil PL2T behind your desk top equipment and pull the PL2T over to you. It's a very classy way to position your Heil microphone. The brass insert accepts a 1/2″ stem.
MORE»
| Price | $49.00 |
Not only is the Fin a professional microphone with all the qualities you could ask for in a dynamic cardioid microphone, it also just happens to be one of the coolest-looking mics you've ever seen – combining a “vintage” look with a futuristic and timeless feel, all in one shiny microphone.
Best-in-class, smooth, flat response from the shock mounted, large, low mass diaphragm element driven by a powerful magnet, will reward you with rich sound throughout its broad frequency range. The Fin is great in the studio, or live, and it particularly exhibits excellent upper mids.
The Fin has a beautifully sculpted body that is double-chromed in a three-stage plating process. Horizontal fins accent its soft angular profile. As an added bonus, The Fin glows via the four L.E.D. lights inside, which can be turned on and off from via the phantom power from the mixing board. This can make for a dramatic effect, or create that certain “vibe” to enhance your next performance.
The Fin is stocked in chrome and matte black bodies. Each version has either red, white or blue foam color/LEDs.
MORE»
| Price | $229.00 |
The Heil RC 35 is a replacement microphone capsule for wireless transmitters, using the same internal elements as the PR 35. The RC 35 gives you all the great articulation and high rejection of side and rear noise, along with other benefits of the PR 35.
The RC 35 lets you upgrade your transmitter (of most popular brands*) to the PR 35 sound and reliability with wireless freedom and your choice of three looks. The smoother, flatter response with very high side and 180-degree rejection will make it worth replacing your current brand with the RC 35. Turning your wireless transmitter into a world-class microphone is just a few screw turns away.
The RC 35 capsule is compatible with all Lectrosonics, and Line 6 models that have removable capsules. It is compatible with most Shure Wireless with removable capsules, except it will not work with the ULX systems. It is also compatible with the AudixH60 utilizing the included spacer ring.
MORE»
| Price | $249.00 |
The Heil PR28 microphone is made specifically for toms, and snare drums along with other percussion instruments like bongos, conga, timbale, djembes and more. However, the PR28 is suitable for other uses as well where a wide frequency range and immaculate isolation is desired.
Heil Sound engineered the PR28 with a dual suspension dynamic element to eliminate unwanted vibrations and noise, even in the most extreme settings; like when placed above or beneath drums with close proximity monitors, bass cabinets and other sound sources. In fact, the PR28 dutifully isolates the target drum from neighboring drums just inches away, with precision and ease.
The PR 28 has the ability to withstand very high SPLs, meaning it can bring out the best in even the hardest hitting drummers without overload, or bleed-through. When coupled with the optional (patent-pending) HH-1 Mount, it will easily mount and remain exactly where you need it on the drum.
MORE»
| Price | $149.00 |
Not only is the Fin a professional microphone with all the qualities you could ask for in a dynamic cardioid microphone, it also just happens to be one of the coolest-looking mics you've ever seen – combining a “vintage” look with a futuristic and timeless feel, all in one shiny microphone.
Best-in-class, smooth, flat response from the shock mounted, large, low mass diaphragm element driven by a powerful magnet, will reward you with rich sound throughout its broad frequency range. The Fin is great in the studio, or live, and it particularly exhibits excellent upper mids.
The Fin has a beautifully sculpted body that is double-chromed in a three-stage plating process. Horizontal fins accent its soft angular profile. As an added bonus, The Fin glows via the four L.E.D. lights inside, which can be turned on and off from via the phantom power from the mixing board. This can make for a dramatic effect, or create that certain “vibe” to enhance your next performance.
The Fin is stocked in chrome and matte black bodies. Each version has either red, white or blue foam color/LEDs.
MORE»
| Price | $229.00 |
The optional FL-2 flange mount allows the PL2T to be permanently mounted to a desk or table top using three (supplied) screws. The Heil FL-2 Flange Mount also has a security lock, so the PL2T can be tightened to the exact position desired. The brass insert accepts a 1/2″ stem.
MORE»
| Price | $29.00 |
The Heil Sound PR20-SUT is a handheld cardioid dynamic microphone designed for articulate reproduction of vocals, speech, instruments, amplifier cabinets, and drums in studios, clubs, houses of worship, and live stage applications. Though sonically identical to the PR20, the PR20-SUT sports a stainless steel grille in place of the PR20's interchangeable silver, black, and gold grills. The dynamic microphone element features a composite magnet for increased strength and a cardioid polar pattern, which provides significant rear rejection and immunity to feedback. With a 145dB maximum SPL and a frequency response of 50Hz to 18kHz, it is well suited to a wide variety of sources.
Plosives and wind noise are attenuated via the included foam windscreen. An on/off switch allows easy muting between announcements, bands, or sets. The balanced XLR 3-pin output ensures compatibility with most microphone preamps, mixer inputs, portable PA systems, and audio interfaces. A mic clip and carrying bag are also included with the PR20-SUT.
MORE»
| Price | $119.00 |
The Heil Handi Mic Pro Plus microphone is just 4 inches tall and has a sleek matte black finish. The smaller footprint makes it a perfect for those tight places like in and around drums in a drum kit and placing inside a Leslie cabinet. The Handi Mic Pro Plus has a frequency range that is perfect for the human voice, plus, it's designed with an open rubber shock mount that eliminates hollow sounds. With the Handi Mic Pro Plus you get a black acoustical windscreen, a mic stand clip.
MORE»
| List | $99.00 |
| Price | $89.10 (Save: $9.90) |
This WSM wind screen helps eliminate “B” & “P” pops in your vocals. The WSM is designed to snuggly fit the Heil PR20 and PR35 dynamic microphones.
MORE»
| Price | $5.00 |
Not only is the Fin a professional microphone with all the qualities you could ask for in a dynamic cardioid microphone, it also just happens to be one of the coolest-looking mics you've ever seen – combining a “vintage” look with a futuristic and timeless feel, all in one shiny microphone.
Best-in-class, smooth, flat response from the shock mounted, large, low mass diaphragm element driven by a powerful magnet, will reward you with rich sound throughout its broad frequency range. The Fin is great in the studio, or live, and it particularly exhibits excellent upper mids.
The Fin has a beautifully sculpted body that is double-chromed in a three-stage plating process. Horizontal fins accent its soft angular profile. As an added bonus, The Fin glows via the four L.E.D. lights inside, which can be turned on and off from via the phantom power from the mixing board. This can make for a dramatic effect, or create that certain “vibe” to enhance your next performance.
The Fin is stocked in chrome and matte black bodies. Each version has either red, white or blue foam color/LEDs.
MORE»
| Price | $229.00 |
The Heil PR48 kick drum microphone is the end result of what happens when you start with the finest kick drum microphone components – listen to what your customers want based on real-world drumming conditions, and put it all together. Heil incorporates suggestions from some of the best drummers and drum & sound technicians in the world into the PR48. That and two years of “in the field” research refining these suggestions, yields the PR48, ready to take on any kick drum.
The PR48 contains a large vulcanized double shock-mounted diaphragm element, impervious to external vibration and noise. The PR48 also has our best rear noise rejection, and excellent (148 db) SPL handling; all housed in a solid flat black emron steel body with red screens on an adjustable swivel-mount. Heil adds passive internal low pass filters to create rises in the frequencies where the kick drum's sound benefits most. The kick beater is also represented like never before in the mix through this filtering. This is a great rock kick drum mic, but also is at home serving country, jazz, funk, blues and metal drummers with a kick drum sound that has no equal.
While some kick drum microphones judge themselves by how well they can handle EQ; how about a kick drum mic that sounds fantastic with NO EQ! As a finishing touch, the PR48 has a 45 degree angle XLR plug to allow for easier XLR connecting during setup. The PR48 can be purchased separately, or in the HDK drum kit series, (HDK-5, HDK-7 and HDK-8), and is available with a variety of microphone mounting options. With the PR48 you get the built-in metal swivel mic stand mount connected.
MORE»
| Price | $249.00 |
The SM-1 Shock Mount is an 8-point flexible suspension support system that helps suppress low-frequency rumble on the microphone line by absorbing and damping vibrations picked up from the studio desk or console. The SM-1 is designed for use with the slim-line Heil Sound microphones, such as the PR 20. Its 5/8″ threads mount onto the PL-2T “Topless” and other mounts, for easy installation.
MORE»
| Price | $79.00 |
The DT-1 is a flush mount for the PL2T. Drill a 1-1/2″ hole in the desk top, then tighten the large washer and nut of the DT-1 from below the desk. This creates the ultimate in a classy mount for all Heil booms. The brass insert accepts a 1/2″ stem. Requires a 1-1/2″ hole for mounting and will mount to surfaces 1/2″ to 2″ thick.
MORE»
| Price | $39.00 |
The Heil HH-1 drum mic mount is patent pending, in part, for its utility in mounting microphones to drums securely. The HH-1 offers several options to mount, including via the rim, or to the mounting hoops of the drums. The fully adjustable HH-1 was developed with input from jazz drummer and producer Hunter Herman (hence the HH-1 designation). The HH-1 addresses the need to place drum mics in perfect proximity to the drum to get the desired sound, while ergonomically mounting and remaining fully adjustable. Whether top mounting, or for when you need a little space between the drum & mic, and/or you're mounting from underneath, you can place your mic with confidence. With the HH-1, you can get into the tightest of tight spots, and you can place microphones where they are going to operate at their optimum level of performance. In live situations, the HH-1 lets sound technicians do great work, without fear of mic stands moving around, or worrying about inferior mounts that tend to break. Accepts 1/4″-20 and 5/8″-27 standard mic threads.
MORE»
| Price | $49.00 |
